|
The swirling, edgy phaser that started it all in 1973!
This handwired classic features select resistors paired with hand-matched components to achieve the same smooth and warm modulation as the original . . . the result? Gobs of thick, rich tone.
This little box can be heard on more hit albums than any other FX box in history - hands down!
1: INPUT JACK Connect a cord from your instrument here. Removing the cord from the INPUT jack
when not in use disconnects the battery which will prolong battery life.
2: OUTPUT JACK Connect a cord out to your amplifier here.
3: 9 VOLT INPUT Connect an optional power supply here. Accepts an industry standard 9 Volt regulated
DC supply with a 2.1mm barrel type connector, center contact negative. The Whirlwind PS9V-EFX
power supply is recommended for proper operation.
4: SPEED CONTROL Varies the speed of the phasing effect.
5: STATUS LED Illuminates when the effect is active.
6: FOOTSWITCH Turns the effect on and off. When OFF, the unit is completely removed from the signal
path (TRUE BYPASS).
7: BATTERY COMPARTMENT Remove 4 screws on the bottom of the unit to access the battery. Be sure to
leave the protective insulator in place to prevent the circuit board from contacting the metal case.
$107.65
|
