MPM1V and MPM1 Auto Paging Audio Video Mixers manage video, audio and provide paging in a single zone application. Switch between three sets of RCA phono type composite video and stereo audio inputs with push buttons located on the front of the unit (video and audio with the MPM1V, audio only with the MPM1). Each input has its own volume control and there's a master volume and four band tone control section. In addition, there are Priority Line and Priority Mic inputs, each with their own volume controls. Connect the jukebox to the stereo Priority Line Input and it will automatically override and mute the selected audio input when the music kicks in and ramp that input back up when the jukebox is done. Connect a mic to the Priority Mic Input for paging (microphone not included) and the MPM1 immediately lowers or "ducks" the volume on the other inputs, including the Priority Line Input, and then gently ramps it back up when you're finished. Ducking amount is adjustable to 0dB (none), - 20db (lowered into the background) or -70dB (off). Internal jumpers allow reversing of these priority assignments so that the Priority Line Input mutes the Mic input - useful for emergency announcement capability. An internal jumper allows you to switch off the ducking feature to one output side only. This allows you to keep the background music constant in the dining room while still ducking and paging in the waiting area.
Need more inputs? Connect an external stereo mixer like the Whirlwind MIX-5s to the MPM1's stereo buss.
Need to feed more zones? Connect a Whirlwind DA2 to the output and feed 4 stereo zones or 8 mono zones, each with its own volume control.
The output section features stereo RCA phono connectors and balanced XLRs. The XLRs can be set to stereo or mono operation with a rear panel button. Use the XLRs when set to mono to drive 70V line amps for ceiling speakers while keeping the RCAs in stereo.
The MPM1 and MPM1V are housed in a 1U steel chassis with removable rack ears.
MPM1RV Remote Control : This control adjusts the main volume of all outputs except paging, from a remote location. Install it behind the bar or at the hostess station. In an office installation, place it at a reception area, security desk or other convenient location. The control is mounted on a single-gang stainless steel wallplate and connects with ordinary three-conductor hookup wire via solderless screw terminals. The maximum audio level is set at the front panel of the MPM-1, which can be kept in a secure location or an optional security cover accessory (MPM1SC) is available to help you keep it all under control.
MPM1SC - Security Cover (optional accesory)
This optional accessory plate keeps the controls safe from unauthorized use.
